|
| |
| Description |
Posted by |
Size |
Thumbnail |
| Hex Head, Coarse UNC Machine Screws
to 1-1/2 Inch |
C Bliss |
110K |
 |
| Hex Head, Fine UNF Machine Screws
1/4" to 1-1/2 Inch |
C Bliss |
109K |
 |
| 88 Nuts, Includes: Normal and Heavy
Nuts, Normal and Heavy Jam Nuts, . Sizes from 1/4" to 1-1/2" Course and
Fine Thread |
Sean
Dotson
|
98K |
 |
| 60 Machine Nuts from 0-80 to
3/8", Fine and Course Thread, Square / Hex, single and double chamfer (updated 7-25-02). |
Sean
Dotson
+ Karl Mass |
85K |
 |
Large Hex Nuts, Heavy and Jam
UN, UNS and UNC threads
from 1 5/8" to 4"
90 Nuts Total |
Larry
Caldwell |
107K |
 |
| Castle and Slotted Nuts, UNC-UNF,
1/4" to 1-1/2", 88 sizes in all. |
Phil Argabrite |
119K |
 |
| Flex Lock Nut, 8-32 to 2"-12,
32 sizes, UNC, UNF, UN & UNS |
Jerry R. Payton |
179K |
 |
| Acorn Nuts, Inch, 24 sizes from #6
to 1 1/4" |
Sean
Dotson
|
113K |
 |
| NyLock Nut, Inch, Standard and
Narrow, 58 sizes, #4 to 1 1/2", UNC and UNF |
Quinn Zander |
126K |
 |
| Whiz Nuts, 16 sizes #6 to 3/4 UNC
and UNF |
Chris Williams |
108K |
 |
Alan Nuts, UNC & UNF, 4-40 to
1",
28 sizes |
Cory McConnell |
134K |
 |
| Copuling Nuts, Course and Fine,
Inch, #4 to 1", 21 Nuts total. |
Quinn Zander |
130K |
 |
ANSI A & B Washers, Normal,
Regular and Wide. Helical Lock Washers. Three files included, Inch
(Replaced Lock Washer 4/6/01) |
Stephen P. Spinney |
193K |
 |
| AN960 Steel Washers, #2 to
3/8", (R10) |
Brian Foreman |
68K |
 |
| MS15795 Steel Washers, #0 to
1", (R10) |
Brian Foreman |
68K |
 |
| Counter Sinked Washers, #4 to
1/4" (R8) |
Cory McConnell |
143K
 |
 |
ANSI/ASME B18.21.1-1994, Internal
and External Lockwashers, #2 to 1-1/4
86 to choose from |
Ken Mueller |
110K
|
 |
| KEP Nuts, #4 to 3/8", UNF and
UNC |
Miles Ivaska |
162K |
 |
| Bellville Washer (cupped), 142
sizes, ,093" to 2" ID |
Cory McConnell |
94K |
 |
| Bellville Metric Washer (cupped). |
|
|
 |
| Wave Spring Washer, 1/4" to
1" nominal ID, 48 sizes (R8) |
Cory McConnell |
122K
|
 |
| Wave Washer, .134 to 5.96",
slightly flat for constraining, steel and stainless, 49 sizes (R7) |
Bill Howe |
98K
|
 |
| Spirolox RSN Retaining Ring, 107
Sizes from .443" ID to 14.363" ID |
John Muchow |
165K |
 |
| Douglas Stamping Washer, Round FSC
and "D" DSC, 68 Sizes, .21" to 1" bore |
Jason McNamara |
53K |
 |
| Chicago Hardware Bevel
Washer,1/4" to 1-1/4",10 Sizes (R8) |
Cory McConnell |
72K
|
 |
| Bearing retainer nuts, NE series,
16 sizes from N-00 to AN-15. Some of the threads were fudged to match Thread.xls
values. Correct me if I am wrong. |
Ole Germer |
84K |
 |
| Whittet-Higgins W series Bearing
retainer locking washer. 33 sizes from W-00 to W-44 |
Monty Montgomery |
144K |
 |
| Metric Safety-Lock Nut, 10-100mm,
17 Sizes |
Hanspeter Schweizer |
119K
|
 |
| Phillips, Pan Head, Inch Machine
screw 2-56 to 3/8-16. Cataloged length with threads |
C Bliss |
130K |
 |
| Pan Head, Slotted, 148 Sizes, 2-56
to 1/2". |
C Bliss
Don Richards |
103K |
 |
| Button Head, Inch. 2 files, Hex and
Torx. UNC and UNF. 195 Sizes |
C Bliss
Mike Magill |
260K |
 |
| Button Head Hex socket, Metric, 146
sizes, 3mm to 12mm dia, Steel and Stainless |
Ron Crain |
114K |
 |
| Flanged Button Head Screw, 6-32 to
3/8-16. 28 sizes |
Mike Maxwell |
95K |
 |
Plastite Pan Head Torx machine
screws,
53 sizes from #00 to 1/4" |
Ron Crain |
125K |
 |
| Flat Head Machine Screw, Phillips,
Inch, from 2-56 to 1/2-13 UNC, 113 Sizes |
Chris Williams
FKI Logistex |
85K |
 |
As above but
"fixed" and in R8 format
Flat Head Machine Screw, Phillips, Inch, from 2-56 to 1/2-13 UNC, 113 Sizes |
Chris Williams
FKI Logistex |
90K |
|
Flat Head Machine Screw, 82deg,
2-56 to 3/8", three materials, lengths to 6" w/undercuts , McMaster Carr part
numbers. (R8)
329 sizes |
Peter Kieselbach |
133K
|
 |
Flat Head Machine Screw, Slotted,
Inch, from 2-56 to 3/4-10 UNC
Steel and Brass (R8) |
Kirk Arthur |
157K |
 |
| Round Head Machine Screw, Slotted,
Inch, from 2-56 to 1/2-13 UNC, 153 Size |
Chris Williams
FKI Logistex |
85K |
 |
| Fillister Head, Inch, Plain and
Drilled, #0000 to 3/8", 338 sizes to choose from. |
John Muchow |
165K |
 |
Socket Head Cap Screws, Coarse UNC
3-40 to 1 Inch
243 to choose from |
Neil Munro |
88K |
 |
Socket Head Cap Screws, 243 UNC and
243 UNF to choose from, Two files included in Zip. Sizes from #4 to 1"
(replaced UNC 3/27/01) |
Neil Munro &
Sean Dotson |
223K |
 |
Metric Cap Screws, M1 to M24, 238
sizes to choose from
(replaced UNC 6/14/01) |
Sean Dotson |
100K |
 |
| Lowhead Cap Screws, 104 part, 2
files, #6 to 1/2" UNC and UNF |
Sean Dotson |
186K |
 |
| Lowhead Metric Cap Screw, 3mm to
20mm, 63 sizes. |
Chris Pape |
100k |
 |
| 12 Point Cap Screw, 421 sizes,
1/4" to 1-3/4", varying lengths, UNC |
John Muchow |
133K |
 |
| Metric Flat Head Screws, M3 to M20,
199 sizes to choose from |
Sean Dotson |
101K |
 |
| Shoulder Bolts, Inch, 110 sizes,
1/4" to 2" Diameters, |
Scott Braun |
111K |
 |
| WM Berg shoulder bolts, shoulder
size from 1/8" to 1/2", 45 sizes to choose from. |
Ron Crain |
100K |
 |
Metric Shoulder Bolts, 6mm to 24mm,
96 sizes
(updated 3/1/01) |
Peter Damgaard |
116K |
 |
| Carriage Bolt, #10 to 1", UNC,
145 Sizes |
Milt Schuepfer |
138K |
 |
| Carriage Bolt, 1/4" to
1", UNC, 264 Size |
Diana Trapsa |
146K |
 |
| FlatHead, Inch, 2 files, UNC &
UNF, #4 to 3/4", 207 UNF sizes and 207 UNC sizes |
Sean
Dotson
|
221K |
 |
| Inch Set Screws, 306 sizes from
2-56 UNC to 1-8 UNF (replaced 12/02/01) |
Sean
Dotson
|
121K |
 |
| Square Head Cup Point Set Screw,
10-24 to 1-1/2", 59 sizes |
John Muchow |
122K |
 |
| Brass Tip Inch Set screws |
Alan Rennick
(derived from Sean Dotson's above) |
109K |
 |
| Wedge Anchors, Inch, 1/4" to
1", 37 sizes (R8) |
Kirk Arthur |
104K |
 |
| Lag Bolt, American National
Standard #10 to 1 1/4", Hex Head, 72 sizes |
Milt Schuepfer |
126K
|
 |
| Lag Bolt, American National
Standard #10 to 1 1/4", Square Head, 72 sizes |
Milt Schuepfer |
120K
|
 |
Bugle Head Drywall & Decking
Screws,
#6 - #10, 1" to 6" long, 42 sizes |
Alan Rennick |
135K |
 |
Wood Screw, Round Head, Philips
Size# 4,5,6,8,9,10,12,14
85 Sizes, (R10) |
Josh Petitt |
248K |
 |
Wood Screw, Round Head, Slotted
Size# 4,5,6,8,9,10,12,14
85 Sizes, (R10) |
Josh Petitt |
228K |
 |
Wood Screw, Oval Head, Philips
Size# 4,5,6,8,9,10,12,14
85 Sizes, (R10) |
Josh Petitt |
261K |
 |
Wood Screw, Oval Head, Slotted
Size# 4,5,6,8,9,10,12,14
85 Sizes, (R10) |
Josh Petitt |
242K |
 |
Wood Screw, Flat Head, Philips
Size# 4,5,6,7,8,9,10,12,14
91 Sizes, (R10) |
Josh Petitt |
242k |
 |
Wood Screw, Flat Head, Slotted
Size# 4,5,6,7,8,9,10,12,14
91 Sizes, (R10) |
Josh Petitt |
227K |
 |
| T-Nuts, 6 sizes from 1/4" to
5/8" |
Dave Hoder |
59K |
 |
| DrivLok Grooved Pin, Type G, 203
sizes, 3/32-1/2" Diameters, Lengths to 4 1/2" |
James Gralinski |
102K
|
 |
| Thumb Screw, 6-32 UNC to
1/2-13 UNC, 49 sizes. |
John Muchow |
80K
|
 |
| Plastic Head Thumb Screw, 66 sizes
#4-40 to 5/16", UNC & UNF |
Richard Cook |
88K
|
 |
| Stamped Wing Nuts, Inch, 6-32 to
3/8. Approximates ANSI sizes from 3 different families. Can be slow to
calculate |
C Bliss |
82K
|
 |
| Forged Wing Nut, ANSI
B18.17-1968,R1975, 53 sizes, #3 to 3/4" UNC & UNF |
Sean Thompson |
140K
|
 |
| PEM Library, Inch, 1243 parts, Type
F, SP, BSO, CL, FH, FLH, SO, TSO |
Ron Crain
Phil Agrabrite |
1M |
 |
| PEM Library, Metric, 919 parts,
Type F, FHL, BSO, CL, FH, SO, SP, TSO |
Ron Crain
Phil Agrabrite |
1M |
|
| PEM Library, Inch, 407 parts, Types
CLA, CLS, FHA, FHS, S, SOA, SOS, PF30, Atlas AEL |
John Hunter |
722K |
 |
| PEM type F, 13 sizes, 2 variations,
2-56 to 1/4-20 Configurations with and without iMates |
Andy Mckenna |
123K |
 |
PEM Flush Self-Clinching Fastener
(Type f), 13 sizes, 2-56 to 1/4-20
|
Hal Gwin |
100K |
 |
PEM Nuts, Inch, 132 sizes, 4
materials, 2-56 to 1/2"
(replaced 3/1/01) |
Brian
D. Verboort |
98K |
 |
PEM Nuts, Inch, 132 sizes, 4
materials, 2-56 to 1/2" updated to R5 with iMate
|
Brian
D. Verboort |
100K |
 |
| PEM Blind nut, 20 sizes, 4-40 to
1/4-20 |
Hal Gwin |
114K |
 |
| PEM Pilot Pin Flush Head Stud, FPS
Inch and Metric. 3mm - 6mm ,1/8" - .25", 28 sizes |
Hal Gwin |
70K |
 |
| PEM Style B, Metric Blind,3mm to
6mm, Steel and Stainless, 16 sizes, (R9) |
Bill Howe |
146k |
 |
PEM Standoffs, Inch, 156 sizes, 3
materials, 4-40 to 10-32, R5 with iMate
|
Brian
D. Verboort |
137K |
 |
| PEM Studs, Inch, 67 sizes, 2-56 to
5/16", various lengths, FH series. |
Mike Maenpaa |
69K |
 |
| PEM Snap Top Standoff, .156 dia,
lengths from 3/16 to 1-1/16 |
Miles Ivaska |
128K |
 |
| Keenserts, Inch, 92 Heavyweight #8
to 1", 48 Lightweight #10 to 1/2" and 22 Miniature #0 to #8 (added Heavyweight 4/1/01) |
Michael (Nyi Oo) Myo |
294K |
 |
| HeliCoil, 420 parts, #2 -
1-1/2", 1191, 3591, 1185, 3583 Series. (External Threads require Included Spread
sheet to be merged into your Threads.xls) |
Curt Fitzwater |
570K |
 |
| HeliCoil, 420 parts, #2 -
1-1/2", 1191, 3591, 1185, 3583 Series. (No External Threads) |
Curt Fitzwater |
460K |
 |
Helicoil, Metric, 115 Locking and
115 non-locking,M2 to M39
Includes Metric Helicoil Spread Sheet to be merged into Threads.xls |
Phil Argabrite |
299K |
 |
| Ultrasert I, 12 sizes, Inch and
Metric, 4-40 to 1/4" & 3mm to 6mm |
Ron Crain |
146K |
 |
| Ultrasert II, 44 sizes, Inch and
Metric, 0-80 to 3/8" & 2mm to 10mm |
Ron Crain |
133K |
 |
| Pop Rivits, Inch, 102 Domed, 21
Countersunk, 3/32" to 1/4" |
Quinn Zander |
249K |
 |
| Drive Screws, 180 sizes from #00 to
#14, Steel and Stainless |
Cory McConnell |
162K |
 |
| Captive Panel Screw, 4-40 UNC &
6-32 UNC, 15 sizes (R7) |
Cory McConnell |
87K
|
 |
|
