iPart Q&A
Fastener
Plumbing
Hardware
Power
DIN
Tools and Tooling
Electrical
Enclosures
Fittings
Bearings
Structural
| |
Inventor iParts. What are they and what do you
do with them?
The iParts are R4 and Higher, newer version parts are not compatible with older versions
of Inventor. Some of the R4 and R5.x parts may need modification to work in R5 and
higher.
| Description |
Posted by |
Size |
Thumbnail |
| ANSI Production Dowel Pins, Inch,
1/16" to 3/8", 243 to choose from. |
Sean Dotson |
105K |
 |
| ANSI Ground Machined Dowel Pins,
Inch, 87 to choose from. 1/16" to 3/4" |
Sean Dotson |
82K |
 |
Metric Dowel Pins, 4mm to 25mm
103 to choose from |
Sean Dotson |
66K |
 |
| Spring Pins, Inch, 267 sizes, 1/16
to 3/4 Inch |
Sean Dotson |
110K |
 |
External Inch Snap Rings
72 sizes from .117 to 3.316(updated 1/26/01) |
John Manly |
87K |
 |
Internal Inch Snap Rings
71 sizes from .268 to 3.71(updated 1/26/01) |
John Manly |
81K |
 |
"E" Inch Retainer Rings,
17 sizes from E-4 to E-137 |
John Manly |
80K |
 |
E-Ring, Metric, 18 sizes,
BZ0,8-BZ30,
DIN 6799 |
Alberto Maffi |
124K |
 |
| Wika 1/4" Guage, 4 styles,
with and without flange mount. Bottom or back connection |
Alan Rennick |
135K
 |
 |
1/8 - 1/4 Zerk Fittings. Several
lengths and angles to choose from.
50 different parts in all. |
Quinn Zander |
156K
|
 |
| O'Rings, 422 Sizes, 6 Cross
Sectional sizes, Metric |
Maffi Alberto |
122K |
 |
| 548 Metric Single Lip Seals.
Very slow to calculate due to very large spread sheet table. Hint: trim table down
to the seals you use. |
Malcolm Mack |
153K
|
 |
You are the  to visit this page
|
