| Twist Drills, Letter, Fraction,
Number, Metric. 362 in all. A true work of art. |
Jeff Howard |
203K
 |
 |
| Combination Wrenches, 1/4 to
7/8" and 8mm to 24mm ( I can't find my smaller ones) |
CBliss |
133K
|
 |
| Multi Bit Screw Driver |
CBliss |
1.5M |
 |
T-Wrench, English and Metric
(R8) |
Quinn Zander |
|
 |
| Snap-On Mini Pick, Hook, 90, 45 and
Awl (R8) |
Quinn Zander |
321K
|
 |
3/8" Drive 12 Point Sockets
1/4" - 3/4"
(R8) |
Quinn Zander |
254K |
 |
3/8" Breaker Bar
(R8) |
Quinn Zander |
609K |
 |
3/8" Socket Holder
(R8) |
Quinn Zander |
295K |
 |
| Nut Driver set, 3/32 to 3/8 Inch
(small), 10 sizes in 1/32 increments |
Christopher Hackman |
189K
|
 |
| Single Edge Razor Blade (R11) |
Phil Davis |
111K
|
 |
| Pencil very (not accurate R8) |
C.Bliss |
240K
|
 |
| Paper Clamp (R8) |
Ray Iturr |
316 |
 |
| Various Battaries w/bitmaps applied |
Ron Crain |
944K |
 |
CarrLane Locating Pins, Round and
Diamond, .1235-.9990
319 to choose from |
Daniel Trombley |
126K
|
 |
Allen Wrench, Inch and Metric,
.71mm-19mm & .028" - 3/4"
42 sizes |
Jim Tippett |
97K |
 |
| Drill Bushing, Inch, 405 sizes,
ID's .052 to 1.75", OD's 1/4" to 2.25" |
Brian Land |
149K |
 |
| H Drill Bushings, 166 sizes, ID's
from .086" to 1", OD's from 13/64" to 1-3/4" |
Brian Land |
120K |
 |
| ANSI Press Fit Drill Bushings. Custom iPart
(you set the bore), 308 sizes, .25"-2.25" OD, headed and headless |
Jerry R. Payton |
182K |
 |
| CarrLane Ball Knob, 27 sizes, inch
& metric |
Gerry Johnston |
60K
|
 |
| CarrLane Oval Tapered Knob, 8 Sizes |
Gerry Johnston |
59K
|
 |
| Ruler, 12" |
CBliss |
155K
|
 |
| Ruler, 380 mm |
Rob Reed |
202K
|
 |
| 9" Torpedo Level |
Quinn Zander |
 |
 |
| Starrett Dividers and Granite Block |
Quinn Zander |
660K |
 |
| Assembly of a De-Staco Clamp, can be driven open
and closed |
Rich Harrod |
814K |
 |
| Assembly of a De-Staco Clamp 351 |
Tom Morness |
841K |
 |
| Assembly of a De-Staco 602 Clamp |
Gerald Johnson |
620K |
 |
| Assembly of a De-Staco 640 Clamp |
Gerald Johnson |
681K |
 |
