| Boston Spur Gear, 12 to 54 teeth,
20 Pitch. Includes both simplified and complex forms. Use complex if you need proper
meshing. Output filenames will not conflict with each other but are similar. |
Kevin Guzniczak |
243K |
 |
| Boston Spur Gear, Custom iPart, 11
to 30 teeth |
Alex Espinosa |
70K
 |
 |
14 1/2 deg Gear Rack, 32 DP to 5 DP
Variable Length |
Jay Dyck |
65K |
 |
| Bevel Gears, two files, 30 to 72
Tooth Driven, 12 to 24 Tooth Pinion, Martin B series. 23 sizes of each. |
Alan Rennick |
323K |
 |
| Spur Gears, Martin. 169
sizes, 14.5 and 20 degree Pressure angle, |
Barna Madau |
135K |
 |
| Involute Gear, Use as a template,
not an iPart. 12 tooth to 400 tooth. Diametral pitch -- 1/2 to 36, pressure angle 14 1/2,
20 and 25 degrees |
Ole Germer |
103K |
 |
| Internal Involute Gear, As above
but. 24 tooth to 400 tooth. Diametral pitch -- 1/2 to 36, pressure angle 14 1/2, 20 and 25
degreesn |
Ole Germer |
102K |
 |
| Renold WMU worm gear unit with
cover (not shown). Two styles, output Shaft and output Bore. 12 sizes, 4"
to 9" |
Ole Germer |
485K |
 |
| Electric Motors, NEMA Frame sizes
from NEMA 42 to NEMA 145T. These are close approximations, Frame measurements should
be correct, Stator Diameter and length are estimates. |
C Bliss |
165K |
 |
| TEFC NEMA frame motors, 56T to
449T, 31 sizes total |
Rob Gloudemans |
147K |
 |
| Baldor 56C Frame TEFC motor (R8) |
Larry Caldwell |
228K |
 |
| Dodge Motor Base, 15 sizes, |
Robert D. LaBree |
115K |
 |
| Stepper Motors, Sanyo Denki, 28 mm to 60
mm square frame, Thread mount and through hole. 24 sizes. You may want to add connectors, |
C Bliss |
194K |
 |
NEMA single and dual shaft Stepper
Motors, Frame sizes 23T, 34T and 42T
16 to choose from. |
Kevin Schneider |
104K |
 |
Allen Bradley Servo motors (series
1326)
36 Configurations with and without brakes dimensions based on catalog data |
Mike van Leeuwen
|
196K
|
 |
RingFeder
Heavy Duty Locking Assemblies SERIES TAS 3012
Double taper with self-locking tapers and an integral pre-centering section.
51 sizes from 1" ID to 8" ID. |
Alan Rennick |
85K
|
 |
| ETP Posi-Lok Coupling, Inch and
Metric 15mm to 55mm & 3/4" to 2", 55 sizes |
Mike Magill |
91K
|
 |
Miniature Posi-Lok Coupling,
6mm to 28mm & 1/4" to 1", 25 sizes |
Mike Magill |
103K
|
 |
| B-Loc B400 series, Inch and Metric,
3/4" to 2" & 20mm to 50mm, 30 sizes |
Mike Magill |
111K
|
 |
| Rutland Clamp Collars. Two
files, Single and Double Split. Sizes from 1/4" to 2", Three materials. 84 to
choose from |
Sean Dotson |
160K
|
 |
| Lovejoy Coupling and Spyder. 211
Couplings and 11 matching Spyders |
Ole Germer |
185K
|
 |
| Excel Driven Sproket,chain pitch
3/8" x 7/32", 1/2" x 5/16", 5/8" x 3/8", 3/4" x
7/16", 1" x 17,02mm. 1 to 3 row ° Teeth 8 to 40, unit of measurement: mm
(S.I.) |
Alessandro Ceruti |
98K
|
 |
| Metric taper lock sprocket and
bush, chain series 35-50, 90 Sprockets: 15 to 95 Teeth. 107 Hubs, 14mm to 75mm
|
Scott Alford |
239K
|
 |
3 Different styles of ANSI chain
links. Includes mulit row links #25 to #240
28 Links, 28 Connector Links and 28 offset links |
Ole Germer |
234K
|
 |
| QD Bushing, 57 Sizes |
Mirek Tokarz |
95K
|
 |
| QD Bushing, Types, JA, SH, SDS, SK,
SF, E, F, J, M, N, P. Bore from .5" to 7", 476 parts to choose from (R8) |
Cory McConnell |
189K
|
 |
| Luff® QD Drum Pulley, 6" to
36" OD, Face Width 12" to 63", 1395 Sizes (R8) |
Cory McConnell |
212K
|
 |
| Luff® QD Wing Pulley, 6" to
36" OD, Face Width 12" to 63", 702 Sizes (R8) |
Cory McConnell |
315K
|
 |
| Taper Lock Bushings, .75" to
1.25" Bore. Twelve sizes. |
Greg Purviance |
78K
|
 |
| Metric Drive Shaft, not iParts but
a good start for your drive shafts (R8) |
Thomas Mayer |
1.5M |
 |
| Luff® Impact Idler, 21" to
45" Trough Width, 20 Sizes (R8) |
Cory McConnell |
341K
|
 |
| Luff® Idler, 8" to
48" Belt Width, 40 Sizes (R8) |
Cory McConnell |
298K
|
 |
| Luff® Return Idler, 18" to
48" Belt Width, 10 Sizes (R8) |
Cory McConnell |
225K
|
 |
